Bax Admin  

First time connect
Skip the 'Fax User' window that first appears on your screen by clicking the cancel button.
In the main window, click the 'Admin' button. The following window will appear. Note: if the admin button does not show up, hold the crtl button down while double clicking in the title bar just above the printer button.

Device default IP address: 192.168.168.168
Default password: baraka
If you cannot manage to connect, please refer to the FAQ page.

Must Do
Change the IP address of your device so that it reflects your network. 
Change the default password. Quit obvious.

Ping Monitor
Monitors the IP addresses that you have selected
Click Menu / Ping Monitor. 
Available upon registration of any Baraka software.

Configure device IP
Click Menu / Device / Config

Restart
Will restart the fax server only, no device reboot.
Click Menu / Device / Restart

Reboot
Will reboot your device.
Click Menu / Device / Reboot

Stop
Will stop your device.
Click Menu / Device / Stop

Change Password
First time connect must do.
Click Menu / Chg Admin Passwd

Adjust Time/Date
Will adjust the time and date of your fax device.
Click Menu / Date Time Config

Add Modem
Will walk you through the necessary steps to add a new modem.
Click Menu / Add Modem

Remove Modem
Will walk you through the necessary steps to remove a modem from the server.
Click Menu / Remove Modem / Refresh button. The installed modem will be listed in the drop down box.
Select the desired modem and click 'OK', Bax will remove it from the server.

Modem
See Modem Config for more details.

Add User
Click Add User in Bax Admin window.

Click Add User tab in Add / Remove window.
Enter users Login name and password for simple users.
For administrative writes fill the Fax Admin Password box.
NOTE : These are case sensitive.

Add Address
Click Add Address tab in Add / Remove window.
For additional info on syntax, put your mouse over the example below the text box.

Remove User/address
Click Remove tab in Add / Remove window.
Click the update button to see the list of users / address.
Select the appropriate user / address and click the remove button. You will be prompt to confirm the deletion.

Telnet
Refer to the Telnet web page.

Statistics
Click Statistic button in Bax Admin window.
Select the sent or received tab and click update.
You may then save the content to a file.